Model No.: low, high density
Model NO.:low, high density
Specification:low, high density
Fdn Water Reducer, Low, High Density
Other Names: Water Reducer FDN
High quality and competitive price
White powder, insoluble in water, soluble in hot and concentrated strong Acid and alkali, having the good chemical stability;
Used for and widely for self-cured, vapor-cured concrete and its formulations.
At the early stage of application, extremely prominent effects are shown.
As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.
Suitable for preparation of early-strength, high-strength, high-anti-filtration and self-sealing& pumpable concrete.
Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc.
|apperance|| Light brown powder& dark brown liquid. Non-poisonous, odorless, non-flammable and non-corrosive to steel bars. |
|type||FDN-A, FDN-B, FDN-C|
|specifications|| Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. |
Appearance: Light brown powder& dark brown liquid. Non-poisonous, odorless, non-flammable and non-corrosive to steel bars. Remarkable Plasticity: As a condition of blending where amount of cement and collapsibility are fixed aforehand, mixing water can be decreased by 18-28% when it is admixed with reinforced concrete at 0.5-1.0%.
Statistically, compression strength on the lst day, the 3 rd day and the 28 th day after single application is increased by 60-90% and 25-60% respectively when it is added at standard blend dosage.
As the result, compression strength, tensile strength, buckling strength and modulus of elasticity will be improved to some extent. Improve miscibility of concrete amalgamator with water and collapsibility as well. As a condition of equivalent blending, collapsibility can be increased 5-8 times when it is added at 0.7% blend dosage. 15-20% of cement can be reserved when the agent is blended at 0.7% blend dosage, which is preconditioned by same collapsibility and strength. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
Prepare solutions as required. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development Either laboratory experiment succeeds.
Liquid: Sealed plastic drums to prevent accidental leakage and evaporation
| || |
|Storage||Keep in shaded, cool and dry place, Shelf life is two years.|
Contact us if you need more details on Fdn. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Reduction、Superplasticizer FDN. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Superplasticizer FDN
Email to this supplier
High Purity Food Grade & Industrial Grade Ammonium AlumFdn Water Reducer, Low, High DensityChrome Oxide Green (1308-38-9) for PigmentWater Treatment Potash Alum (7784-24-9)Copper Oxide 1317-38-0Industrial Grade Calcium HydroxideIron Oixde Pigment with Good Quality98% Zinc Sulphate - Znso4White Pigment, Zinc Oxide CAS No. 1314-13-2KOH Potassium Hydroxide 90%, 95%Borax 99% Anhydrous, 5 H2O, 10 H2O 1303-96-4Carbon Black N220, N330, N550, N770, N990Water Treatment Aluminium Sulphate 15.8%~17%95% 98%Pentaerythritol (115-77-5) for Coating Industry77% 85% 90% 98% 64-18-6 Formic AcidSoda Ash - Sodium Carbonate, Naco3 497-19-8