Water reducing agent polyether TPEG for Concrete Superplasticizer polyether monomer
Product Description
Water Reducing Agent polyether TPEG for Concrete Superplasticizer polyether monomer Specification
Product Description Chemical Structure:CH2=CH(CH3)CH2CH2O(CH2CH2O)m(CH2CH3CHO)nH Chemical name:methyl and vinyl polyoxyethylene/propylene ethers Properties and Uses:These intoxic and bland products are soluble in water and other solvents.As the important material f the polycarboxylic water-reduce agent,they have great effect in dispersing cement pellets. The environmental-friendly products feature a small dosage and good effect upon reducing water and strengthening. The final water-reduce agent shows a great durability and rustproof against seel bar.These products are suitable to formulate commercial concrete with great property and stength(aboveC60)either at construction site or after a long-distant delivery. Other name:polyether monomer,polycarboxylate superplasticizer macromonomer,Polycarboxylate Polyether Monomer Quality Indexs:These products are made with the most advanced ethoxylation technology and production unit.The final products feature accurate molecular wieght,low glycol. Content,high double-bonding retention rate.The prepared water-reduce agents feature good cohesion and slump. 
First Aid Measures Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention. Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing. Serious Skin Contact: Not available. Inhalation: Allow the victim to rest in a well-ventilated area. Seek immediate medical attention. Serious Inhalation: Not available. Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Serious Ingestion: Not available. FACTORY 
FAQ Q1: What is your MOQ? A1: Our MOQ is 1 TON. Q2:Do you offer free sample? A2:We can provide samples for free for our furture cooperation Q3: Is it a dangerous merchandise ? A3: Not dangerous merchandise, Not legal inspection merchandise Q4:what is your lead time ? A4: Within 5-7 working days after receipt of payment or L/C. Q5:what’s your packing ? A5:There is plastic pellicle inside and is exteriorly packed with plastic woven bag with 25kgs as net weight per bag or 550kgs per bag on pallet . Q6: Can you make packing and logo as customer request? A6: yes we can , if you have special needs ,please contact us . Q7: Are you manufacturer or trader? A7:we have 13 years of production experience ,9 years of export experience . Q8:what’s your productive capacity ? A8: 40000 tons Lignosulphonate products and total 15000 tons sodium Gluconate & Sodium Naphthalene Sulfonate per year . Q9:what’s your export port ? A9: usually in TIANJIN And we have storage in Tianjin , Shanghai and Guangzhou . Q10: What is your payment term? A10: 30% T/T after confirm the contract/PI, balance before shipment or against copy of Bill of Loading . Q11:Do you accept L/C,D/P,D/A? A11:we think T/T is the best way for us. It is fast, safe and low cost. after our cooperation ,can have other way . Our customer Our products have been exported to those markets as map shows, our clients are keeping reorders based on our excellent quality and service. Some new orders from other new markets are sustainable growth everyday! 
Contact us if you need more details on Tpeg. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Reducing Agent Polyether、Concrete Superplasticizer. If these products fail to match your need, please contact us and we would like to provide relevant information.
| Product | TPEG-2400 | TPEG-3000 |
| Appearance (25℃) | White flake | White flake |
| PH value
(1% aqueous solution) | 5.0-7.0 | 5.0-7.0 |
| Hydroxyl value
(MgKOH/g) | 22.0-25.0 | 17.5-19.5 |
| Lodine value
(gI2/100 g) | ≥9.6 | ≥7.3 |
| Double bond retention
(% ≥) | ≥92.0 | ≥90.0 |
First Aid Measures Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention. Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing before reusing. Serious Skin Contact: Not available. Inhalation: Allow the victim to rest in a well-ventilated area. Seek immediate medical attention. Serious Inhalation: Not available. Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Serious Ingestion: Not available. FACTORY FAQ Q1: What is your MOQ? A1: Our MOQ is 1 TON. Q2:Do you offer free sample? A2:We can provide samples for free for our furture cooperation Q3: Is it a dangerous merchandise ? A3: Not dangerous merchandise, Not legal inspection merchandise Q4:what is your lead time ? A4: Within 5-7 working days after receipt of payment or L/C. Q5:what’s your packing ? A5:There is plastic pellicle inside and is exteriorly packed with plastic woven bag with 25kgs as net weight per bag or 550kgs per bag on pallet . Q6: Can you make packing and logo as customer request? A6: yes we can , if you have special needs ,please contact us . Q7: Are you manufacturer or trader? A7:we have 13 years of production experience ,9 years of export experience . Q8:what’s your productive capacity ? A8: 40000 tons Lignosulphonate products and total 15000 tons sodium Gluconate & Sodium Naphthalene Sulfonate per year . Q9:what’s your export port ? A9: usually in TIANJIN And we have storage in Tianjin , Shanghai and Guangzhou . Q10: What is your payment term? A10: 30% T/T after confirm the contract/PI, balance before shipment or against copy of Bill of Loading . Q11:Do you accept L/C,D/P,D/A? A11:we think T/T is the best way for us. It is fast, safe and low cost. after our cooperation ,can have other way . Our customer Our products have been exported to those markets as map shows, our clients are keeping reorders based on our excellent quality and service. Some new orders from other new markets are sustainable growth everyday! Contact us if you need more details on Tpeg. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Reducing Agent Polyether、Concrete Superplasticizer. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Ungrouped
Other Products
Hot Products
High Purity Food Grade & Industrial Grade Ammonium AlumFdn Water Reducer, Low, High DensityChrome Oxide Green (1308-38-9) for PigmentWater Treatment Potash Alum (7784-24-9)Copper Oxide 1317-38-0Industrial Grade Calcium HydroxideIron Oixde Pigment with Good Quality98% Zinc Sulphate - Znso4White Pigment, Zinc Oxide CAS No. 1314-13-2KOH Potassium Hydroxide 90%, 95%Borax 99% Anhydrous, 5 H2O, 10 H2O 1303-96-4Carbon Black N220, N330, N550, N770, N990Water Treatment Aluminium Sulphate 15.8%~17%95% 98%Pentaerythritol (115-77-5) for Coating Industry77% 85% 90% 98% 64-18-6 Formic AcidSoda Ash - Sodium Carbonate, Naco3 497-19-8