Ammonium sulphate pharmaceutical grade BP2013 standard
Basic Info
Model No.: pharma grade
Product Description
Ammonium Sulfate
Molecular Formula : (NH4)2SO4
Molecular Weight : 132.14
INS: 517
CAS: [7783-20-2]
Ammonium Sulfate
Specifications of Commercial Pure Ammonium Sulfate
Appearance: White powder
Nitrogen N content: 21.0% min (dry basis)
Moisture: 0.3% max
Free Acid: 0.05% max
Fe: 0.007% max
As: 0.00005% max
Insoluble matter: 0.01% max
Heavy Metals: 0.005% max
Ammonium Sulfate USP NF Grade
(NH4)2SO4 -- 132.14
Ammonium sulfate [7783-20-2].
Ammonium Sulfate contains not less than 99.0 percent and not more than 100.5 percent of (NH4)2SO4.
Identification: A solution (1 in 20) responds to the tests for Ammonium and for Sulfate.
Microbial limits: The total aerobic microbial count does not exceed 1000 cfu per g, and the total combined molds and yeasts count does not exceed 10 cfu per g.
pH: between 5.0 and 6.0, in a solution.
Residue on ignition: Not more than 0.005%, determined on a 20-g sample.
Limit of insoluble matter: Maximum 0.005%).
Limit of phosphate: To pass the test.
Limit of chloride: To pass the test.
Assay: Transfer about 2.5 g of Ammonium Sulfate, accurately weighed, into a 500-mL conical flask, and dissolve in 50 mL of water. Add 50.0 mL of 1 N Sodium hydroxide VS, place a filter funnel loosely in the neck of the flask, and boil until ammonia is expelled (about 10 to 15 minutes) as determined with litmus paper. Cool, add 0.15 mL of thymol blue TS, and titrate the excess sodium hydroxide with 1 N sulfuric acid VS. Perform a blank determination (see Residual Titrations under Titrimetry 541 ). Each mL of 1 N sodium hydroxide is equivalent to 66.07 mg of (NH4)2SO4.
Ammonium Sulfate FCC as per US Food Chemical Codex
Ammonium Sulfate or Ammonium Sulphate
(NH4)2SO4 Formula wt 132.14
INS: 517 CAS: [7783-20-2]
DESCRIPTION
Ammonium Sulfate occurs as colorless or white crystals or granules that decompose at temperatures above 280°. One gram is soluble in about 1.5 mL of water. It is insoluble in alcohol. The pH of a 0.1 M solution is between 4.5 and 6.0.
Function: Dough conditioner; yeast nutrient.
REQUIREMENTS
Identification: A sample gives positive tests for Ammonium and for Sulfate.
Assay: Not less than 99.0% and not more than 100.5% of Ammonium Sulphate or Ammonium Sulfate (NH4)2SO4.
Lead: Not more than 3 mg/kg.
Residue on Ignition: Not more than 0.25%.
Selenium: Not more than 0.003%.
Ammonium Sulfate ACS Analytical Reagent specifications
American Chemical Society Reagent Grade
Ammonium Sulphate
(NH4)2SO4
Formula Wt 132.14
CAS Number 7783-20-2
REQUIREMENTS
| Assay of Ammonium Sulphate or Ammonium Sulfate | 99.0% (NH4)2SO4 |
| pH of a 5% solution | 5.0-6.0 at 25C |
MAXIMUM ALLOWABLE
| Insoluble matter | 0.005% |
| Residue after ignition | 0.005% |
| Chloride (Cl) | 5 ppm |
| Nitrate (NO3) | 0.001% |
| Phosphate (PO4) | 5 ppm |
| Heavy metals (as Pb) | 5 ppm |
| Iron (Fe) | 5 ppm |
Contact us if you need more details on Ammonium Sulphate Fine Crystal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ammonium Sulphate BP2013 Standard Pharma Grade、Ammonium Sulfate NH42SO4 BP2013. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Sulfate > Ammonium Sulfate